W415-2797 / A / 01.31.20
EN
18
fi nishing
4.6 backerplate
installation
A.
Install brackets (supplied) onto both sides of the appliance by inserting the hooks into the desired
appliance slots.
B.
Place the hooks on the backerplate into the slots in the brackets previously installed in step A
(Fig. 4-8)
.
C.
Adjust the blower air channel by sliding it forwards or backwards
(Fig. 4-9)
.
D.
Fasten the blower air channel in place by installing 2 screws (supplied)
(Fig. 4-10)
.
4.7 logo
placement
Remove the backing of the logo supplied and place, as illustrated.
Brackets are asymmetrical. During installation, ensure the top tabs face forward
(Fig. 4-7)
.
note:
Fig. 4-7
Fig. 4-8
Fig. 4-10
NOTE:
Top
Tabs
Face
Forward
Hook
Slot
Hook
Slot
Fig. 4-9
Blower Air
Channel
1/2”(13mm)
1/2”(13mm)
Backerplate