18
F U N C T I O N M E N U
15. Activate Telephone Test?
(Telephone Test programmed?
YES
NO). Sends a
communicator test to the central station. A communication failure will be indicated at the
keypad by a system trouble “E03-00” display. Repeat the test to attempt to correct a
communication failure, as any successful communication will clear this display.
16. Delay Arming 1-4 hours.
(Not for UL-listed systems). Your system may be set to
arm automatically after a delay period of 1 to 4 hours. To Delay Arm the system:
•
With Function 16 in the window, enter the desired Delay Arming time in hours (
1
,
2
,
3
,or
4
), followed by
u
.
At the end of this 1 - 4 hour Delay Arming period, the siren will sound a 2-second warning
and the keypad will begin a 15-minute arming countdown with the sounder pulsing. The
sounder may be silenced at this time by pressing
y
, but it will turn back on with a
steady warning tone 1 minute prior to arming, at which time the building must be exited.
The same steps can be used to delay a scheduled Auto Arming, if your system has been
programmed as such.
17. Activate Program?
Activates the Program Mode from Keypad No. 1.
Note:
This
feature is disabled while armed. (See PROGRAMMING USER CODES).
18. Activate Download?
For installer's use only. If accidentally enabled, press
y
to exit.
Note:
This feature is disabled while armed.
CHIME
15
CHIME
16
CHIME
17
CHIME
18
