PACIFIC D23
10 |
P a g e
PACIFIC D23
Nardi Compressori – www.nardicompressori.com
the joints and if minor defects are present replace them. In any case, hoses must be replaced
every 12 months.
•
Check regularly the condition of the fittings.
•
Do not repair damaged parts if you do not have original parts from Nardi Compressori.
•
Do not modify the machine except with express written authorization from Nardi Compressori.
•
In case of visible wear and tear of any components of the compressor, do not use the machine
until the worn parts are replaced with original parts. Check if there is additional damage to other
parts of the compressor.
•
Before starting the machine, make sure no one is in contact with it.
•
Be careful about any moving parts and do not get in contact with them.
•
Do not change the ventilation system of the compressor and make sure it is positioned so as to
ensure the proper circulation of air.
•
When starting the compressor, make sure that the sense of rotation of the compressor is equal
to that indicated by the arrow on the fan wheel cover.
2.04 GENERAL SAFETY CONSIDERATIONS:
1.
The operator qualified to use the compressor, shall be aware of all the provisions and devices to control the
machine, tools, indicators and all the information on the various stickers/labels attached to the machine.
2.
Always have first aid supplies, and a CO2 fire extinguisher. Make sure the extinguisher is fully charged and
ready to work at all times.
3.
When operating the compressor, use appropriate protective clothing such as safety shoes, goggles, gloves and
so on.
4.
Always disconnect the power cable when performing operations within the compressor, never perform any
operations on it with the power on while the compressor is in operation.
