PACIFIC E23 – EG23
7 |
P a g e
PACIFIC E23 – EG23 Rev.01
Nardi Compressori – www.nardicompressori.com
1.05 DESCRIPTION OF PACIFIC E23 – EG23 :
The structure of the
PACIFIC E23 – EG23
is very robust, designed to suppress vibration discharging it on the ground
and thus reducing up to 60% of noise. This is possible thanks to an internal thermo acoustic insulation that guarantees
noise levels lower than 70db(A).
All the elements, the internal structure and the walls around the internal structure are painted with epoxy coatings which
grant an extraordinary resistance to corrosion. This ensures longer lasting of the equipment and as a consequence it
extends the life of the compressor block inside.
The air filtering system is placed in the front part of the compressor, in the outside, in order to simplify and expedite the
replacement of the filter cartridge. It is possible to add a second filtering system (optional accessory) that can be placed
next to the filtering system present in the compressor.
In the front, we also find the electric control panel and the final pressure gauge. Up to four filling valves can be used to
connect filling hoses and filling valves. The condensate drain valve is placed in the back of the compressor.
COMPRESSOR COMPONENTS:
1.
Electronic control panel
2.
Final pressure gauge
3.
Filling valves and hoses
4.
Filtering System PAC FILTER 1
(PAC FILTER 2 and PAC FILTER 3 are optional)
