English
18
Angular grinder EBU 125‑12 C , EBU 125‑14 C , EBU 125‑14 CE
Original operating manual (EN)
Description of the device
1.......Switch
2.......Vent holes
3.......Lock spindle pin
4.......Revolutions pre-setting
5.......Gearbox
6.......Clamping collet
7.......Spindle
8a ....Protective guard for grinding
8b ....Protective guard for cutting
*
9.......Guide lugs
10 ....Clamping bolt
11 ....Bottom flange
12 ....Wheel
*
13 ....Clamping nut
*
14 ....Quick-clamping nut
*
15 ....Clamping nut recess
16 ....Wrench
17 ....Additional handle
18 ....Hexagonal wrench dia. 4 mm
19 ....Lever
*) Depicted or displayed accessories need not necessarily
become the integral part of delivery.
Technical Specification
Model
EBU 125‑12 C
EBU 125‑14 C
EBU 125‑14 CE
Voltage
(V)
230 230 230
Mains frequency (Hz)
50–60
50–60
50–60
Power input (W)
1 200
1 400
1 400
Idle speed (rpm)
10 500
11 000
3 500–11 000
Grinding/cutting wheel dia. max. (mm)
125
125
125
Additional handle SOFTGRIP
Circumferential speed (m/s)
80
80
80
Work spindle thread
M 14
M 14
M 14
Limits to interaction current
Revolutions pre-setting
Constant electronics
Heat protection
Weight without tool (kg)
2.3
2.3
2.3
Class of protection
II /
II /
II /
General Power Tool Safety Warnings
WARNING! Read all safety warnings and all in‑
structions.
Failure to follow the warnings and in-
structions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference!
The term “power tool” in the warnings refers to your mains-op-
erated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a)
Keep work area clean and well lit.
Cluttered or dark are-
as invite accidents.
b)
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust.
Power tools create sparks which may ignite the dust
or fumes.
c)
Keep children and bystanders away while operating
a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a)
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools.
Unmodified plugs and
matching outlets will reduce risk of electric shock.
b)
Avoid body contact with earthed or grounded surfac‑
es, such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
c)
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of elec-
tric shock.
d)
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts.
Damaged
or entangled cords increase the risk of electric shock.
Table of contents
Description of the device ..........................................................18
Technical Specification .............................................................18
General Power Tool Safety Warnings .....................................18
Special Safety Instructions .......................................................19
Information about noise level and vibrations ......................21
Double insulation ......................................................................21
Use ...............................................................................................21
Protective elements and their assembly ...............................21
Grinding or cutting wheel fixing .............................................21
Putting into operation ..............................................................22
Motor electronics .......................................................................22
Grinding and cutting discs .......................................................22
Maintenance and service .........................................................22
Storage ........................................................................................22
Environmental protection ........................................................22
Warranty .....................................................................................22
Certificate of Conformity ..........................................................23
Summary of Contents for EBU 125-12 C
