Narex EPL 12-7 BE, Original Operating Manual

English

18

General Power Tool Safety Warnings

WARNING! Read all safety warnings and all instructions. 

Failure to follow the warnings and instructions may result 

in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference!

The term “power tool” in the warnings refers to your mains-operated 

(corded) power tool or battery-operated (cordless) power tool.

1)  Work area safety

a) 

Keep work area clean and well lit.

 Cluttered or dark areas invite 

accidents.

b) 

Do not operate power tools in explosive atmospheres, such as 

in the presence of flammable liquids, gases or dust.

 Power tools 

create sparks which may ignite the dust or fumes.

c) 

Keep children and bystanders away while operating a  power 

tool.

 Distractions can cause you to lose control.

2)  Electrical safety

a) 

Power tool plugs must match the outlet. Never modify the 

plug in any way. Do  not use any adapter plugs with earthed 

(grounded) power tools.

 Unmodified plugs and matching outlets 

will reduce risk of electric shock.

b) 

Avoid body contact with earthed or grounded surfaces, such as 

pipes, radiators, ranges and refrigerators.

 There is an increased 

risk of electric shock if your body is earthed or grounded.

c) 

Do not expose power tools to rain or wet conditions.

 Water en-

tering a power tool will increase the risk of electric shock.

d) 

Do not abuse the cord. Never use the cord for carrying, pulling 

or unplugging the power tool. Keep cord away from heat, oil, 

sharp edges or moving parts.

 Damaged or entangled cords in-

crease the risk of electric shock.

e) 

When operating a power tool outdoors, use an extension cord 

suitable for outdoor use.

 Use of a cord suitable for outdoor use 

reduces the risk of electric shock.

f) 

If operating a power tool in a damp location is unavoidable, use 

a residual current device (RCD) protected supply.

 Use of an RCD 

reduces the risk of electric shock.

3)  Personal safety

a) 

Stay alert, watch what you are doing and use common sense 

when operating a power tool. Do not use a power tool while you 

are tired or under the influence of drugs, alcohol or medication.

A moment of inattention while operating power tools may result 

in serious personal injury.

b) 

Use personal protective equipment. Always wear eye protec-

tion.

 Protective equipment such as dust mask, non-skid safety 

shoes, hard hat, or hearing protection used for appropriate condi-

tions will reduce personal injuries.

c) 

Prevent unintentional starting. Ensure the switch is in the off-

position before connecting to power source and/or battery 

pack, picking up or carrying the tool.

 Carrying power tools with 

your finger on the switch or energising power tools that have the 

switch on invites accidents.

d) 

Remove any adjusting key or wrench before turning the power 

tool on.

 A wrench or a key left attached to a rotating part of the 

power tool may result in personal injury.

e) 

Do not overreach. Keep proper footing and balance at all times.

This enables better control of the power tool in unexpected situa-

tions.

f) 

Dress properly. Do not wear loose clothing or jewellery. Keep 

your hair, clothing and gloves away from moving parts.

 Loose 

clothes, jewellery or long hair can be caught in moving parts.

g) 

If devices are provided for the connection of dust extraction 

and collection facilities, ensure these are connected and prop-

erly used.

 Use of dust collection can reduce dust-related hazards.

4)  Power tool use and care

a) 

Do not force the power tool. Use the correct power tool for your 

application.

 The correct power tool will do the job better and safer 

at the rate for which it was designed.

b) 

Do not use the power tool if the switch does not turn it on and 

off.

 Any power tool that cannot be controlled with the switch is 

dangerous and must be repaired.

c) 

Disconnect the plug from the power source and/or the battery 

pack from the power tool before making any adjustments, 

changing accessories, or storing power tools.

 Such preventive 

safety measures reduce the risk of starting the power tool acciden-

tally.

d) 

Store idle power tools out of the reach of children and do not 

allow persons unfamiliar with the power tool or these instruc-

tions to operate the power tool.

 Power tools are dangerous in the 

hands of untrained users.

e) M

aintain power tools. Check for misalignment or binding of 

moving parts, breakage of parts and any other condition that 

may affect the power tool’s operation. If damaged, have the 

power tool repaired before use.

 Many accidents are caused by 

poorly maintained power tools.

f) 

Keep cutting tools sharp and clean.

 Properly maintained cutting 

tools with sharp cutting edges are less likely to bind and are easier 

to control..

g) 

Use the power tool, accessories and tool bits etc. in accordance 

with these instructions, taking into account the working condi-

tions and the work to be performed.

 Use of the power tool for 

operations different from those intended could result in a hazard-

ous situation.

5) Service

a) 

Have your power tool serviced by a qualified repair person us-

ing only identical replacement parts.

 This will ensure that the 

safety of the power tool is maintained.

Additional Safety Instruction

– 

Hold power tool by insulated gripping surfaces, when perform-

ing an operation where the cutting accessory may contact hid-

den wiring or its own cord.

 Cutting accessory contacting a “live” 

wire may make exposed metal parts of the power tool “live” and 

could give the operator an electric shock.