Narex EPL 12-7 BE, Original Operating Manual

English

22

Warranty

Our equipment is under warranty for at least 12 months with regard to 

material or production faults in accordance with national legislation. In 

the EU countries, the warranty period for exclusively private use is 24 

months (an invoice or delivery note is required as proof of purchase).
Damage resulting from, in particular, normal wear and tear, overloading, 

improper handling, or caused by the user or other damage caused by 

not following the operating instructions, or any fault acknowledged at 

the time of purchase, is not covered by the warranty.
Complaints will only be acknowledged if the equipment has not been 

dismantled before being sent back to the suppliers or to an authorised 

NAREX customer support workshop. Store the operating instructions, 

safety notes, spare parts list and proof of purchase in a safe place. In ad-

dition, the manufacturer’s current warranty conditions apply.

Information about noise level and 

vibrations

The values have been measured in conformity with EN 60745.
Acoustic pressure level L

pA

 = 86 dB (A)

Acoustic power level L

wA

 = 97 dB (A)

In accuracy of measurements K = 3 dB (A)

ATTENTION! Noise is generated during work!
Use ear protection!

Vibration emission value a

h

 (vector sum for three directions) and 

uncertainty K measured in accordance with EN 60745:
Sawing wood a

h,D

 = 4.5 m.s

-2

In accuracy of measurements K = 2.0 m.s

-2

Sawing metal a

h,ID

 = 3.0 m.s

-2

In accuracy of measurements K = 2.0 m.s

-2

The emission values specified (vibration, noise) were measured in ac-

cordance with the test conditions stipulated in EN 60745 and are intend-

ed for machine comparisons. They are also used for making preliminary 

estimates regarding vibration and noise loads during operation.
The emission values specified refer to the main applications for which 

the power tool is used. If the electric power tool is used for other ap-

plications, with other tools or is not maintained sufficiently prior to 

operation, however, the vibration and noise load may be higher when 

the tool is used.
Take into account any machine idling times and downtimes to estimate 

these values more accurately for a specified time period. This may sig-

nificantly reduce the load during the machine operating period.

Certificate of Conformity

We declare that the device meets requirements of the following stand-

ards and directives.

Safety:

EN 60745-1; EN 60745-2-11
Directive 2006/42/EC

Electromagnetic compatibility:

EN 55014-1; EN 55014-2; EN 61000-3-2;EN 61000-3-3
Directive 2004/108/EC

 2013

Narex s.r.o. 

Chelčického 1932 Antonín Pomeisl 
470 01  Česká Lípa 

CEO of the company 

 01. 06. 2013

Changes are reserved