Narex EV 13 G-2, Original Operating Manual

English

17

Warranty

Our equipment is under warranty for at least 12 months with re-

gard to material or production faults in accordance with national 

legislation. In the EU countries, the warranty period for exclusively 

private use is 24 months (an invoice or delivery note is required as 

proof of purchase).

Damage resulting from, in particular, normal wear and tear, over-

loading, improper handling, or caused by the user or other dam-

age caused by not following the operating instructions, or any 

fault acknowledged at the time of purchase, is not covered by the 

warranty.

Complaints will only be acknowledged if the equipment has not 

been dismantled before being sent back to the suppliers or to an 

authorised NAREX customer support workshop. Store the operat-

ing instructions, safety notes, spare parts list and proof of purchase 

in a  safe place. In addition, the manufacturer’s current warranty 

conditions apply.

Information about noise level and 

vibrations

The values have been measured in conformity with EN 60745.

Acoustic pressure level L

pA

 = 81 dB (A).

Acoustic power level L

wA

 = 91 dB (A).

In accuracy of measurements K = 3 dB (A).

ATTENTION! Noise is generated during work!

Use ear protection!

Vibration emission value ah (vector sum for three directions) and 

uncertainty K measured in accordance with EN 60745:

Drilling a

h,D

 = 1.2 m/s

2

In accuracy of measurements K = 1.5 m/s

2

The emission values specified (vibration, noise) were measured in 

accordance with the test conditions stipulated in EN 60745 and are 

intended for machine comparisons. They are also used for making 

preliminary estimates regarding vibration and noise loads during 

operation.

The emission values specified refer to the main applications for 

which the power tool is used. If the electric power tool is used for 

other applications, with other tools or is not maintained sufficient-

ly prior to operation, however, the vibration and noise load may be 

higher when the tool is used.

Take into account any machine idling times and downtimes to 

estimate these values more accurately for a specified time period. 

This may significantly reduce the load during the machine operat-

ing period.

Certificate of Conformity

We declare that the device meets requirements of the following 

standards and directivesc.

Safety:

EN 60745-1; EN 60745-2-1

Directive 2006/42/EC

Electromagnetic compatibility:

EN 50366; EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3

Directive 2004/108/EC

 2013

Narex s.r.o. 

Chelčického 1932 

Antonín Pomeisl 

470 01  Česká Lípa 

CEO of the company 

 01.06.2013

Changes are reserved