Narex VYS 30-21, Original Operating Manual

English

14

Technical Specification

Vacuum cleaner

Type model 

VYS 30-21 

VYS 30-71 AC

Voltage 

230 V

Frequency 

50–60 Hz

Line fuse min. 

16 A

Power input 

1 200 W

Power input of connected device max. 

2 400 W

Total power input max. 

3 600 W

Airflow volume 

3 700 l/min

Negative pressure 

25 kPa (250 mbar)

Height x width x depth 

600 x 380 x 450 mm

Protection 

lP X4

Power cable length 

7.5 m (H05 RR-F)

Weight 

10 kg 

11 kg

Accessories 

(Depicted or displayed accessories need not necessarily become the integral part of delivery)

Filter PET, order No.: 

00 763 290 

00 765 492

Filter bag (5 pcs.), order No.: 

00 763 288

Dust bag (5 pcs.), order No.: 

00 763 289

Control elements

1 .............Handle with guide facilitating el. cable winding 

2 .............Fastener 

3 .............Movable wheel 

4 .............Vacuum cleaner canister 

5 .............Hole for hose connection 

6 .............Vacuum cleaner switch 

7 .............Appliance socket 

8 .............Switch for start of filter cleaning (VYS 30-21)

Scope of use

The vacuum cleaner is suitable for suction of dry inflammable dust substances 

and liquids

·  It  is  prohibited  to  suck  up  dust  substances  harmful  for  human  health, 

hot  materials  (glowing  cigarettes,  hot  ash,  etc.),  flammable,  explosive, 

aggressive liquids (e.g. petrol, diluents, acids, lye, etc.), flammable, explo-

sive dusts (e.g. magnesium and aluminum dust, etc.).

The vacuum cleaner is suitable for commercial purposes, i.e. for use e.g.:

·  in hotels, in schools, in hospitals, in factories, in shops, in offices, in leased 

areas.

Any use exceeding the scope identified above is considered non-conforming 

use. The manufacturer is not liable for any damage following from non-con-

forming scope of use. Correct use also comprises adherence to the conditions 

of operation and maintenance preset by the manufacturer.

Transportation

Prior to transportation all locking and closing vacuum cleaner container com-

ponents have to be closed (covered).

Do not incline the vacuum cleaner, if water is in the tank.

Do not lift the vacuum cleaner, using the crane hook.

Safety Instructions

WARNING! Read all safety warnings and the complete man-

ual.

 Failure to follow the warnings and instructions may result in 

electric shock, fire and/or serious injury.

Save all instructions and the manual for future reference.

The device is not intended for use by the persons (incl. the children), whose 

physical, sense or mental inability or lack of experience and knowledge pre-

vents them from safe use of the device, unless they are supervised or instruct-

ed adequately by the person liable for their safety.

The children should be supervised to prevent their playing with the device.

WARNING!  Use  the  socket  on  the  vacuum  cleaner  for  the  purpose  de-

fined in the operating instructions only.

Complementary Safety Instructions

·  The vacuum cleaner may be used in the interiors only. For outdoor ap-

plications the el. cable of H05 RR-F type is needed. Cable replacement 

may be carried out by the authorized service station only.

·  The supply cable may not be tensioned excessively, may not lie on sharp 

edges and may not be passed over or damaged mechanically otherwise.

·  Check the supply cable regularly. The vacuum cleaner with damaged ca-

ble may not be used. When replacing the extending cable, supply cable, 

etc., the class of protection and mechanical strength may not be affected 

anyhow.

·  If the supply cable is damaged, it has to be replaced by the manufac-

turer, servicemen or another qualified person to prevent occurrence of 

a dangerous situation.

·  Prior  to  start  any  repair  or  maintenance  works,  disconnect  the  supply 

cable from the socket.

·  Protect the plug, socket and connecting parts of the supply cables from water.

·  Protect the top vacuum cleaner part from water. Danger of short circuit!

·  Prior to each use check the vacuum cleaner filter for intactness.

·  Prior to each use check the vacuum cleaner floater for normal operation 

and for cleanliness of its sealing surface.

·  Do not remove any flammable liquids, e.g. petrol, diluents, etc., using this 

vacuum cleaner. Danger of explosion!

·  ATTENTION! In case of foam of liquid leak switch the appliance off im-

mediately.

·  Use original spare parts only.

·  Carry out maintenance and cleaning in such a way not to endanger your-

selves or other persons by dangerous dust.

·  The vacuum cleaner must be checked by a qualified and trained person 

from the point of its safe operation once a year as a minimum.

·  When working in closed rooms, adequate ventilation has to be provided. 

Observe relevant national regulations.

·  The sucked materials can be considered environmental risk. Dispose the 

vacuumed impurities in conformity with the valid legal regulations.

Scope of use and methods of operation

Dry substance vacuuming

Prior to start vacuuming dry substances, the dust bag should always be placed 

in the canister (order No. - see the article “Accessories”). The sucked material 

can thus be disposed easily and hygienically.

After suction of liquids the filter cartridge is vet. During subsequent dry sub-

stance vacuuming the vet filter cartridge will clogged more quickly. Therefore 

prior to start dry substance vacuuming, the filter cartridge has to be washed 

and dried or replaced for a dry one.

Liquid suction

Prior to start suction liquids, filter and dust bag must always be removed.

If foam is created, interrupt work immediately and clean the vacuum cleaner 

canister.

Putting into operation

Check whether the data on the rating plate correspond to the real power sup-

ply voltage. Check whether the plug type corresponds to the socket type. The 

attachments intended for 230 V~ can be also connected to 220 / 240 V~.

ATTENTION! The  vacuum  cleaner  may  not  be  connected  to  the  power 

supply source in the ON state!

Loosen the fasteners and remove the top vacuum cleaner part. Place the filter 

bag into the vacuum cleaner canister - see the relevant Figure. Insert the filter 

bag neck firmly onto the hole for hose connection.

Place the top vacuum cleaner part and fix the fasteners.

Connect the suction hose.