GUIA DE ENTRADA PARA MACIZO CUADRADO AL CANTO
4
2. Identification of elements
The inlet guide to emboss solid square bar on the edge up to 20 mm or 3/4” inches is supplied completely
assembled with all necessary bolts to fix it to the machine..
3. Setting up the tooling
In order to fix the tooling to the embossing machine NOA60, it is required to adjust it by fastening the bolts
at the inlet guide of the machine as indicated in the pictures below:
1. Insert the tooling in the inlet guide of the
machine
2. fasten both fixing bolts to the tooling by
the lower part of the inlet guide of the ma-
chine.
