GUIA DE ENTRADA PARA MACIZO CUADRADO AL CANTO
5
4. Performance
In order to start working with the inlet guide to emboss solid square bar on the edge, it is required to adjust
the upper rollers to the material. Turning clockwise around the upper Wheel of the tooling, these upper
rollers will move upwards. By turning the upper Wheel anti-clockwise, the upper rollers will go downwards.
We should make sure the material is properly fixwed and that it kees its position
5. Warnings
Keep the following instructions to safely use the Inlet guide for square bar on the edge.:
- Do not set or remove the tooling while the machine is running.
- Do not use the tooling for any other purpose but the ones described on this handling booklet.
- Use protection gloves to manipulate components and during the working process
- Use homologated protection googles and shoes.
- Hold the base material.
