INSTRUCTIONS BOOK FOR HOT WROUGHT IRON MACHINE PC16 12
Main switch
Tension light
Rearm light
On light
Emergency stop
Rearm buttom
Alarm light
Start
Counter to cero
Stop
Manual mode
ESC
Automatic mode
5. OPERATION MANUAL
The PC16 NARGESA forging machine has 2 modes:
- Manual mode
- Automatic mode
Before explaining the operation modes we’ll explain the different components and features of the forging
machine NARGESA PC16.
5.1. Description of the control panel
On the side of the forging machine PC16 NARGESA there is a cabinet where you can identify the various
controls of the machine. These controls are located in the following picture.
5.2. Start up
To start up the forging machine NARGESA PC16 it will need to be connected to a power source. Once it is
connected, we will switch on the main switch, which will illuminate both the strain gauge pilot and pilot
alarm indicator. Unlock the emergency stop if it is blocked press the rearming button. At this time the alarm
indicator light goes off.
Then we’ll press the ON button (if it is the first time you connect the machine, checkup the direction of mo-
tor rotation guided by the sticker placed on it) so the gear indicator light will illuminate, indicating that the
machine is ready for performance.
Summary of Contents for PC16
