INSTRUCTIONS BOOK FOR HOT WROUGHT IRON MACHINE PC16 15
5.5. Manual mode
The operating Manual mode is used to grade the final position of the zipper that will perform the spiral tip.
In order to select the Manual mode of operation we press the key located in the control panel
The Manual mode functions in such way that when we maintain activated the operating controls while the
machine starts moving forward, if we release the controls it stops maintaining the position and direction of
movement. When the rack reaches the front limit actuates the limit, it stops.
5.6. Automatic mode
The Automatic mode or continuous mode is the working operation of the machine you will use in their usual
production.
In order to select the Automatic mode of operation we press the key located in the control panel
A message will show up on screen: CHANGE TO AUTOMATIC? pressing again to Automatic key, the
machine will start on this performance mode.
The Automatic mode functions to maintain activated while operating controls while the machine starts
moving forward to the final displacement, at raising the zipper it starts moving backward, releasing the
workpiece held by the material held by the fastening cylinder, the return movement is stopped when the
zipper reaches the rest position.
If during the progress we release the controls, the machine starts automatically the backward movement
and then it is not possible to start the forward motion again.
NOTE: You can see the operation of the machine in the product section of our website:
www.nargesa.com or through our YouTube channel at this link:
http://www.youtube.com/watch?v=YwBRkTaldTE
Summary of Contents for PC16
