WiFi module error
- WiFi module error. Restart the unit.
WiFi General event
- WiFi module error. Restart the unit.
WiFi WLAN event
- Network connection failure. Check whether the network
name has been set correctly, etc.
WiFi Socket event
- Server connection problems. If displayed repeatedly,
restart the unit.
WiFi DNS Addr error
- Name server connection failure. Connection is re-
attempted. If displayed repeatedly, check WiFi network
functionality, for example, strength.
WiFi WPS error
- Connection failure to wireless network using WPS. Set
the control unit as an access point by the WLAN Init
command and follow the instructions of the command.
WiFi sl_Stop error
- WiFi module error. Restart the unit.
WiFi Role STA
- Indicates that the WiFi module is connecting to the
wireless network as a network user (Station).
WiFi Role AP
- Indicates that the WiFi module creates a wireless network
(Access point). There is no Internet access from this
network, but WiFi settings can be made by contacting the
network from another device. See item WLAN init.
WiFi Mode Set error
- The WiFi module could not change its operation mode.
Restart the unit.
WiFi Provisioning error
- The WiFi module could not connect to network. Check
the condition and field strength of the network.
Socket closing error
- Error when closing connection with server.
Socket not created
- Server connection initialization failure. If the error persists
after a while, restart the unit.
Socket nonblocking set error
- Server connection initialization error. If the error persists
after a while, restart the unit.
Socket not connected, Timeout
- Failure to establish server connection within the time
allowed. This can sometimes happen if the network is
overloaded. If displayed repeatedly, check the WLAN
network. Possibly related to Internet overload.
Socket not connected
- Failure to establish server connection. This can
sometimes happen if the network is overloaded or the
field strength of the WiFi network is poor.
Sending not complete
- Failure to send message to server. If displayed
repeatedly, check the WLAN network.
Socket msg rec., Timeout
- Timeout of server response to a message.
Socket msg rec., error
- The control unit has not received a response from the
server within the time allowed. This can sometimes
happen if the network is overloaded. If displayed
repeatedly, check the WLAN network. Possibly related to
Internet overload.
Socket closing error
- Failure to close server connection. If the error is
displayed repeatedly, restart the unit.
Return to factory, failed
- Reset to factory settings failed. Try again.
TPS value
- Value provided by the thermopile sensor. The value
should increase as the heat radiation increases after
starting the stove for about 2 minutes.
DISPOSAL OF THE PRODUCT
- Recycle and dispose of the package and product in accordance with valid local
regulations. Do not dispose with mixed waste.
29
Summary of Contents for NARVI WiFi
Page 2: ......