NASA electric NS-626, Manual

7

Troubleshooting 

Problem 

Possible Cause 

Solution 

The device does not 

work.

Components may not be installed 

properly.

The plug may not be plugged in.  

Put the parts in place 

correctly.

Connect the plug properly 

to the electrical outlet

The device suddenly 

stops working.

The food processor container may 

have become loose due to heavy 

work.

The device’s thermal fuse may 

have been activated due to 

overheating.

Please reinstall the 

container.

 Wait for the plant to 

cool down, then use the 

appliance again.  

The motor of the 

device works but its 

parts do not move.

The coupling container may not be 

installed properly.  

 Put the food processor 

container in place 

correctly.  

The blender does not 

turn on.

The blender is not in place 

properly.

The microswitch is not activated.  

Put the blender in the right 

place.  

The mill does not 

light up.

The mill is not in place properly. 

 The microswitch is not activated.  

Put the mill in the right 

place.  

Clean and maintenance guide

1.

 Please switch off the appliance and un

-

plug it to protect against electric shock.  Do 

not immerse the power cord and body of the 

device in water or any other liquid.

2.

 Wash all detachable parts of the device 

except  the  body  with  water  and  detergent, 

then  dry.

3.

 Always place the device in a dry place.

4.

 Do not use abrasive materials or cleaners 

to avoid scratching the device.

5.

 In case of staining of accessories with food 

such  as  carrots,  oranges,  etc.,  clean  them 

with a cloth soaked in oil, then wash and dry.

Product storage and maintenance 

• 

Before  repacking  the  product,  make  sure 

that parts and body of the device are dry.

•

 Please repack the device after finishing work 

and place it in a dry place away from wet.

•

  After  finishing  the  work,  put  the  sharp 

blades  in  your  place  and  housing.