NASA electric NS-935, Manual

NS-935

Citrus Juicer

4

How to work with the device

1.

 Install the device parts 

2.

 Place the appliance on a flat, washable flat 

surface.

3.

 Open the wire as needed from the wire 

housing  )the  wire  housing  is  located  under 

the  device(.

How to selection of parts

1.

 Choose a small or large cone according to 

the desired fruit size.

2.

 Large cone is suitable for large citrus fruits 

such as grapefruit, oranges, etc.

3.

 Small cone is suitable for small citrus fruits 

such as lemons, oranges and etc.

4.

 Place the small cone directly on the cou-

pling on rotating rod.

5.

 If you want to use a large cone, first place 

the small cone on the actuator bar, then 

place the large cone on it. 

6.

 Make sure the large cone slots are on the 

small cone mixer blades.

7.

 To separate the cones from each other, 

pull the large cone up.

How to get fruit juice

Caution:

 Excessive pressure on the cone can 

cause the device motor to stop.

1.

 Remove the juice container of the pulp.

2.

 Place the appropriate cone on the rotating 

rod.

a.

 If you want the juice to collect inside the 

container, push the juice outlet upwards to 

close it.

3.

 If you want the juice to be poured directly 

into the glass, press the juice outlet down to 

open it and then place the container under it.

4.

 Divide the desired citrus into two halves 

and place half of it on the cone. When you 

press the fruit down on the cone, the device 

will automatically turn on and the cone will 

start to rotate. The rotation of the cone will 

separate the pulp and take the juice. In this 

case, the juice is poured from the strainer 

into the container and if the milk opening is 

open in the glass.

A

B

C

D

F

I

E

G

H

A

 Large cone

B

Small cone

C

Filter

D

Juice container

E

Juice outlet

F

Coupling on rotating rod

G

Pusher

H

Body of the device

I

Rotating rod

Device parts & accessories