NASA electric NS-944, Manual

5

Processing foods

Nutlet )hulled(

Cheese

Coffee bean
Pepper corn

Black sesame seed

Dry rice, dry wheat

Soybean

Capacity

20-25 g
20-25 g
20-25 g

10-25 g

20-25 g
20-25 g
20-25 g

Plug in and turn the switch knob to “2” to start 

mincing the meat.

After sufficient mincing, turn switch knob to “O”, 

then unplug and unscrew the jug.

Caution:

• Make sure switch is off and cover is put in 

place before operation, do not run the appli-

ance unloaded.

• Stop operation immediately when it suddenly 

slows down due to sinew or peeling tied to the 

blade. Switch off and unplug. Remove the sin-

ew or peeling with stiring stick and start again.

• Maximum mincing capacity:250g

• Do not operate the mincer longer than 60 

seconds at a time.

Using mill

Reverse the milling container, then put ingredi-

ent, then screw the container tight to base.

Put the mill onto the motor unit, plug in and 

switch onto start grinding.

Unplug after completing grinding, unscrew mill 

and remove it off motor unit.

Revesr the container and tap off the ingredi-

ents adhered, then unscrew the container and 

pour our ingredients.

How to dismantle and assemble

Dismantle:

• Unplug the appliance from the power supply

• Release the lock arm

• Remove the pulp container, transparent lid, 

pusher, pull the filter basket upwards and juice 

collector separately.

Assemble: 

• Place juice collector on the motor unit, and 

insert filter basket.

• Mount transparent lid onto the juice collector, 

and fasten the lock arm upwards until it clicks 

into place.

• Place the pulp container under pulp spout and 

put the juice jug under the juice spout.

• Plug in and ready for operation.

Operating instructions:

• This appliance is equipped with a safety lock 

system. If the transparent lid is not correctly 

placed or the lock arms are unfastened, the 

appliance with not function.

• Before starting, make sure the appliance is 

switched off, the transparent lid and locking 

arm are fastened properly.

• Wash fruits and vegetables thoroughly. Cut 

fruits into small pieces so as to be fitted into 

the feed tube. Remove the stone or peel from 

those citrus and fruits: prunes, apricots, cher

-

ries or oranges lemons, melons etc.

• Plug in and switch on the appliance and 

choose the desired speed according to differ-

ent fruits and vegetables.

• Put the pre-prepared fruits and vegetables 

into the feed tube and press the pusher down 

gently.

• Never use fingers or other objects as pusher.

When pulp container or juice jug is full, switch it 

off and empty the containers before continuing 

the process.

Attention:

Do not run the juice extractor continuously for 

long than 2 minutes. Should more time is re-

Caution: 

• Make sure switch is off before operation

• Do not run the appliance unloaded

• Maximum grinding capacity:50g

• Do not operate the mill longer than 60 sec-

onds at a time