Chapter 8:
Main Toolbar Features
VSP User Manual
63
Version 1.7.92
Script Output
Figure 62: Script Output option in Scrip menu (left) and Scrip Output window (right)
Vorview
Edit
The
Edit
option under the Vorview menu is shown in the figure below:
Input 1 Tab
Base File Name
Specify the name of the file of the figure being used.
Import/Export .cas Files:
use to import/export case files to run in Vorlax
Card 2: Solution
LAX
: chordwise or steamwise spacing of vortices. Setting this to 0 is
cosine spacing
, and
setting the value to 1 is
equal spacing
.
HAG
: Height above ground for ground effect. If the value is 0, then no ground effect
calculation is performed
ISWEEP
: when this value is 0, it runs all the alpha/mach cases inputted. This means it
computes a matrix of runs. When the value is 1, it only runs the diagonal cases of the
matrix, and NMACH and NALPHA must be the same. For example:
If NMACH = NALPHA = 5, the following input:
XMACH = 0.0, 0.1, 0.2, 0.3, 0.4
ALPHA = 0.0, 1.0, 2.0, 3.0, 4.0