4 - RADIO MODE
STATIONS SELECTION
- Extend the antenna wire for better reception of FM stations.
- Press button (13) successively to switch on the device and (7) to select the Radio function.
- The Radio indicator (20) is displayed along with the frequency.
- To manually select a radio station, press button (9) or (10) until the station’s frequency is displayed.
- To initiate an automatic station search, press and hold button (9) or (10) until the frequency starts
to scroll. The search stops when a radio station is found. The automatic search can be interrupted
by pressing button (9) or (10).
- Adjust the sound volume to a correct listening level. Then adjust the sound volume with buttons
(11) and (12).
STATION SAVING
- To select a radio station, press button (9) or (10) until the station frequency is displayed.
- Keep button (6) pressed. P01 will be displayed.
- To select a saved station, press button (9) or (10).
- Press button (6) again to confirm the setting, the saving number stops flashing.
- Proceed as above to save other radio stations. You can set up to 10 radio stations.
LISTENING TO A SAVED STATION
- Press button (13), the last radio frequency appears.
- Press button (6) and then button (9) or (10) to select a saving (P01 to P10).
5 - BLUETOOTH MODE
INFORMATIONS
- The operational range between this device and a Bluetooth device is approximately 10 metres.
- Before connecting a Bluetooth device to this unit, familiarize yourself with the Bluetooth features of
that device.
- Compatibility with all Bluetooth devices is not guaranteed.
- Any obstruction between this device and a Bluetooth device may reduce the operational range.
- Keep this device away from other electronic devices to avoid interference.
BLUETOOTH ACTIVATION
- Press button (13) successively to switch on the device and (17) select the Bluetooth function, the (bt)
symbol will flash (10).
- Start the Bluetooth profile search from the source audio device.
- Select the SW262 profile to synchronize the two devices
(the Bluetooth (19) no longer flashes).
- Playback music from the source audio device.
- Press button (5) to pause.
- Press again to resume playback.
- Press button (9) to move to the next track.
- Press button (10) to return to the previous track.
- Adjust the sound volume to a correct listening level.
Then adjust the sound volume with buttons (11) and (12).
