14
C. CPR and Defibrillation
The infant simulator comes with
anInteractiveECGSimulator(LF03670AU) with part number LF01420U.
Any Nasco Healthcare Life/form
®
Interactive ECG Simulator (LF03670AU)
will work with part number LF01421U. The Interactive ECG Simulator
acts as the load box and can accept up to 360 joules of energy.
Compressions can be performed on the defibrillation chest insert or
alternate chest insert sold separately (see section for replacement parts
and available supplies).
1. Follow the setup instructions on pages 6 and 7 to connect the infant
simulator to the Interactive ECG Simulator.
2. Ensure the defibrillation chest insert is connected. (See figure 33.)
3. Use the round defibrillation adapter posts for manual defibrillation.
4. Screw the round defibrillation adapter posts into the defibrillation
chest insert. (See figure 34.)
5. Screw the round defibrillation adapter post into the defibrillation
chest post site on the posterior of the simulator. (See figure 35.)
6. Included with the simulator is a set of chest post adapters 101-054U,
for use with training cables (sold separately). See the section for
supplies and replacement parts for part number information.
7. Press the on-off button on the Interactive ECG Simulator. NSR
(Normal Sinus Rhythm) and adult age group are the default
selections.
8. Press the age group button to select pediatric rhythms. (See figure
36.)
9. Pressing any of the rhythm buttons will select that rhythm.
10.To convert, select the initial rhythm to display.
11.Press the convert button.
Instructions for Use
13
C. CPR and Defibrillation
The infant simulator comes with an Interactive ECG Simulator (LF03670AU) with part number LF01420U. Any
Life
/
form
®
Interactive ECG Simulator (LF03670AU) will work with part number LF01421U. The Interactive ECG Simulator
acts as the load box and can accept up to 360 joules of energy. Compressions can be performed on the defibrillation chest
insert or alternate chest insert sold separately (see section for replacement parts and available supplies).
1.
Follow the setup instructions on pages 6 and 7 to connect the infant simulator to the Interactive ECG Simulator.
2.
Ensure the defibrillation chest insert is connected.
(See figure 33.)
3.
Use the round defibrillation adapter posts for manual defibrillation.
4.
Screw the round defibrillation adapter posts into the defibrillation chest insert.
(See figure 34.)
5.
Screw the round defibrillation adapter post into the defibrillation chest post site on the posterior of the simulator.
(See figure 35.)
6.
Included with the simulator is a set of chest post adapters 101-054U, for use with training cables (sold separately).
See the section for supplies and replacement parts for part number information.
7.
Press the on-off button on the Interactive ECG Simulator. NSR (Normal Sinus Rhythm) and adult age group are the
default selections.
8.
Press the age group button to select pediatric rhythms.
(See figure 36.)
Figure 35
Figure 36
Figure 33
Figure 34
HC190001INM26.indd 13
2/19/19 1:55 PM
