Specification parameters
Item
Content
Rated power supply
Rated power
Maximum power
Applicable water
pressure
Flushing method
Product size
Cleaning device
Cleaning
water flow
Water pressure
strength
Temperature
adjustment
Heater power
Safety device
Seat
Heater power
Temperature
regulation
Buffering device
Safety device
W
arm wind
Heater power
Temperature
regulation
Buffering device
220V-50HZ / 110V-60HZ (Refer to production nameplate on toilet)
1280W Inlet water temperature about 15±1., inlet water pressure 0.2Mpa
(
)
1650W
2'5 bar models require water intake greater than or
equal to 20L/min)
(
Jet siphoning
670*380*460
The water consumption of buttock washing is about 0.5-0.7L/min
The water consumption of gynecological washing is about 0.5-0.7L/min
Four speeds for gynecological and buttock washing
Four grades of room temperature/about 34/about 37/about 40(±1°)
1600W
Water temperature sensor
45W
Four-speed normal temperature/about 34/about 37/about 40 (±2°)
Hydro-mechanical slow descent / multifunctional electric damping
(only with automatic flip-up lid)
Temperature sensor Temperature fuse
270W
Four-speed Normal temperature/approx. 45/approx. 50/approx. 55 (±5°)
Thermal fuse Thermostat
1. Power on state, the knob indicator is red.
2. Human body seated, the knob indicator is white.
3. Hip wash state, the knob indicator is blue.
4. Women's wash state, the knob indicator is green.
5. Drying state, the knob indicator is purple.
Knob indicator description
Product size: 670×380×460mm
Center pit distance of drainage port 305/400mm
:
Name of each part
Seat cover
Back cover
Knob
Seat ring
Ceramic body
Foot sensor
Cleaning spray bar
Knob use instructions
After entering the seat, release the knob after a short clockwise rotation, open the female
cleaning function, time 90 seconds, or press the stop button to end.
Short press the knob when not seated to turn on the flush function. Long press the knob to
turn off, and long press again to turn on.
After seating, when no function is running, short press the knob to flush; such as a short press
in the process of cleaning or drying, the current function will stop. Long press the knob to turn
on the drying function.
After entering the seat, release after a short counterclockwise rotation, open the hip cleaning
function, time 90 seconds, or press the stop button to end.
INSTALLATION AND USER MANUAL - NASHI OVIAN PLUS - ENGLISH
