Page 12
National Communications
STEP 4 -
TRANSFER HIGH ROTATION SONGS TO YOUR
MESSAGE CARD
If Required - The Fouth step is to TRANSFER ENCRYPTED High Rotation
Files (HRF) to your SD Flash Card.
You should navigate through to each ‘HRF’ that
you require to be copied to the SD Flash Card and
transfer them one at a time by highlighting them
and then clicking the Send Icon.
Note - BMS2 will only play Encrypted Files, so
you should Encrypt each ‘HRF’ first using the
Encrypt MP3 files option from the Main Menu.
STEP 5 - MESSAGE & HITS PLAY PROGRAMMING
Load your
MUSIC Flash Card
into your Flash Card programmer.
In this section, you specify how frequently you wish to play a Message and
a HRF (if required). You can play a message after 1-256 songs, or at intervals
of 1-256 mins. You can play a HRF file after 1-256 songs,
MESSAGE VOLUME
You can also program BMS2 to play
Messages at a HIGHER VOLUME
than the Music by Sliding the slide
bar to the right. This actually
DECREASES the volume of the
MUSIC, relative to MESSAGES.There
are 12 possible settings, each position
represents a reduction of 1.5dB,
providing you with a maximum
reduction of 18dB.
MESSAGE FREQUENCY
The software defaults to SONGS. If
you wish to change to MINUTES, you
should use this drop down box.
HIGH ROTATION FILES FREQUENCY
You can play a High Rotation File after every 1-256 songs, as selected in this
area.
All settings that you have made from this page are then saved in a file
called : SET.TBL, which is then saved on your
MUSIC Flash Card
.
