Page 12
National Communications
USER PROGRAM FUNCTIONS
1.
FIRST REMINDER RING DELAY TIME
Whenever
you place a Call On Hold,
SLS1
can output a REMINDER RING
to remind you that you have a call on hold.
You can set the DELAY TIME before it generates its first REMINDER RING.
Allowable Range
:
01 – 99 seconds or 00 = OFF
Default Setting is
:
15 seconds
2.
PAUSE BETWEEN REMINDER RINGS
You can set the TIME between REMINDER RINGS.
Allowable Range
:
01 to 99 seconds
Default Setting is
:
15 seconds
3.
MAXIMUM ON HOLD TIME
You can set the MAXIMUM ON HOLD CALL TIME.
SLS-1 will HANG UP if a call has not been retrieved by this set time.
Allowable Range
: 10 to 99 minutes, or 00 = OFF
Default Setting is
: 5 minutes