10
Important Operating Instructions
Fluid adjustment
1.
Turn the fluid knob clockwise until it is
fully closed.
2.
After setting up a piece of scrap material,
squeeze the trigger in short bursts while
turning the fluid knob counterclockwise to
set the amount of fluid.
If spray is too fine:
Reduce the air pressure or allow more paint
to come out by opening the fluid knob.
If spray is too thick (globs of paint):
Close the fluid knob slowly. Checking the
pattern after each adjustment.
IMPORTANT:
Proper spraying technique is
ESSENTIAL to achieve good results.
1.
First, prepare the spray gun according to
the instructions under spray gun set-up.
2.
Keep the spray gun upright at a right
angle to the work piece.
Note:
Move your arm, not just your wrist.
Point gun directly towards the surface and
maintain an even, steady distance and
speed.
IMPORTANT:
Do not pivot your wrist or
wave the gun like a fun towards the wall.
3.
Using two hands, one to steady the paint
cup and the other to operate the spray gun,
aim nozzle at the work piece.
Fluid Adjustment
SPRAYING TECHNIQUE
Correct Gun Angle
