13
Important Operating Instructions
Solvent solution
Follow the paint manufacturer’s recommendations for cleaning, solvent type, and disposing
of solvent.
IMPORTANT:
Do not use mineral spirits on latex paints or the mixture will congeal, making
it very difficult to remove.
WARNING: To prevent fire, if a flammable solvent needs to be used, adhere to the
following:
• Follow solvent manufacturer’s clean up instructions and safety precautions.
• Flush spray gun a full hose length from air compressor.
• If collecting flushed solvents in metal container, transfer to nonmetal container, and flush
metal container.
• Work far away from any ignition sources in a vapor free area.
• Keep class ABC fire extinguisher nearby.
After each use
1.
Empty the paint cup and clean it with the solvent.
2.
Fill the paint cup with solvent and spray it through the spray gun into a container, while
shaking the spray gun. Once the paint cup is empty, repeat the process until the solvent
comes out clean.
3.
Disconnect from the air source.
4.
After disconnecting, point the spray gun into the spent solvent container and squeeze
the trigger again to make sure no air remains.
5.
Remove nozzle and soak it in solvent until it is clean. Use an old toothbrush and
toothpicks to remove any paint.
CAUTION:
Do not immerse spray gun.
Note:
Do not use metal objects to clean the nozzle to prevent damage to the passages.
6.
Inspect fluid needle and make sure it is not bent. If it is bent, have it replaced by a
technician.
CLEANING
