10mm Box Wrench
5mm Hex Key
Phillips Screw Driver
PARTS LIST
Index Description
Qty.
1
Windscreen, Quantum Hardcoated polycarbonate
1
With RainZip treatment
2
RainZip treatment, 3oz. Bottle
1
Bag 1008
3
M6 x 16 Stainless Screws w/ Nylok
4
4
Collar L .177
4
5
Foam Pads
4
REMOVAL AND RE-INSTALLATION
Retain all fasteners and parts. Most will be re-
used. Four M6 x 16 Screws and Collars are supplied.
Installation of windscreen will be in reverse order
of removal.
Position stock windscreen in highest position.
1.
Move mirror forward. Lift rubber sleeve to expose inside
attachment point. Repeat on opposite side.
2.
Gently pry “bracket” over hex bolt to in order to remove
hardware holding front body panel in place. Repeat on
opposite side.
Figure 1. (10mm Box Wrench)
To avoid hardware dropping into mirror cavity
stuff a small cloth under hardware! Item (A)
3.
Remove hardware holding front panel in place. Repeat
on opposite side.
Attention
Note
Special notes and cautionary measures
which can prevent damage to the accessory
or motorcycle.
Tips for facilitation of operation,control
and adjustment, as well as maintenance.
N20014 VStream
®
Special Edition
Windscreen for GL1800 2001~
Installation and Owner’s Manual
Quantum™ Hardcoated polycarbonate
with RainZip® Treatment
National Cycle, Inc. PO Box 158, Maywood, IL 60153-0158 USA
708-343-0400 / Fax: 708-343-0625 / www.nationalcycle.com / e mail: info@nationalcycle.com
Page 1 / 4
10-118545-000 03/10
Figure 1
Figure 2
A
Thank you for purchasing a National Cycle® product. Please read these instructions carefully and thoroughly
before beginning work. Dealers if installing this windshield for a customer please give them this manual. It con-
tains information needed to properly maintain and use this product.
