Thank you for purchasing a ZTechnik product. Read these instructions carefully and thoroughly before beginning work. Dealers, if installing this wind-
screen for a customer, please give them this manual upon completion. It contains information needed to properly maintain and use this product.
PACKAGE CONTENTS
ITEM DESCRIPTION QTY.
A
VStream Windscreen 1
TOOLS REQUIRED
T-25 Torx Wrench
ALL OEM FASTENERS AND
GROMMETS WILL BE REUSED.
Figure 1
PREPARATION
Place motorcycle securely on its centerstand.
All OEM fasteners and grommets will be
reused.
OEM WINDSCREEN REMOVAL
Figure 1
With a T-25 Torx Wrench, loosen and remove the four
M5X20 Body Screws and two Trim Panels holding the
OEM Windscreen to the fairing’s Windscreen
Reinforcement Bracket.
Remove the OEM Windscreen.
Remove the four OEM Rubber Grommets from the OEM
WIndscreen and install them in your new VStream
Windscreen
(A)
.
Description:
VStream® Replacement Windscreen
Model:
2021-Later BMW® R1250RT
Part Number:
Z2348/Z2349
Installation Time:
15 min. Difficulty Level: Easy
ATTENTION: Special notes and cautionary measures which
can prevent damage to the accessory or vehicle.
NOTE: Tips for facilitation of operation, control and
adjustment, as well as maintenance work.
Quantum® Hardcoated Polycarbonate
VStream® Windscreen for:
2021~ BMW® R1250RT
Z2348 Clear, Touring
Z2349 Clear, Tall Touring
VStream® Windscreen Patent No. 7,387,328
ZTechnik by National Cycle, Inc.
PO Box 158 Maywood, IL 60153-0158 USA
708-343-0400 / Fax: 708-343-0625 www.ztechnik.com e-mail: info@ztechnik.com
©2022 National Cycle, Inc.
Page 1 of 2
10-129507-000 10/22
