National Electronics & Watch Co, Ltd.
BC10
ALTIMETER mode:
Press S7 from
HRM
mode to enter
ALTI
mode. The watch will display the following in
succession:
Æ
SEARCH GPS
Æ
BATTERY
level
Æ
DATA TRACK MEMORY
Æ
view 1
of
ALTI
mode.
The power level is displayed with an increment of 10%, from 10% to 100%. In Memory
display, the watch will display the remaining hours available in Track memory.
If the power level of the battery is low, the GPS cannot be turned on. The watch will display
BATT.LOW
Different views in ALTI mode:
Following are the various views that user can choose by pressing S3 in
HRM
mode. This
mode is dedicated to HRM views.
View 1
Æ
GPS GO/ HRM/ CHRONO
View 2
Æ
CHRONO/ HRM/ Calorie
View 3
Æ
CHRONO/ HRM/ In Zone
RUN DATA mode
Press S7 from
HRM
mode to enter
RUN DATA
mode. The watch will display the Data list
view. In this view you can see how many files are saved in RUN data. The watch will show the
list of data files with newest on the top of the list.
1. Press S1/S5 to scroll thru the list.
2. Press S3 to enter the selected data file.
3. Press S1/S3 to view the details of the data file. Following are the details available:
•
Start Time / End Time / Distance
•
CHRONO / Distance / Calorie
•
CHRONO / Ave Pace / Max Pace
•
CHRONO / Ave Speed / Max Speed
•
CHRONO / Ave HR / In zone
•
Lap 1 / Lap time / Distance
•
Lap
2…etc….
4. Press S7 to exit
Deleting Data:
Press S7 from ALTIMETER mode to DATA mode.
After
the
Data file appears, press S3
to enter “Start time/End time/ Distance” view. In any sub-views, press and hold S3 to enter the
“VIEW/DEL/ DEL ALL” screen. Press S1 or S5 to select. If “VIEW” is selected, you can view
the details of the data. If “del” is selected, 1 data will be deleted. If “Del All” is selected, all
data files will be deleted.
Data numbering system/ Legend:
Following is the data numbering system.
Sample data number:
D-
01
05
02-
1
01-
G
D
– means Data
01
–
Data number
05
- Month
02
- Day
1
- Data is referred to Time 1 or 2 for Time 2
01
- File number of the day
G
- Data from GPS
Setting the User’s information:
Press S7 from
ALARM mode
to go to
SET mode
and select USER by pressing S1 or S5
when the USER option is highlighted. The sequence of setting are as follows by pressing S3
button: Gender
Æ
Age
Æ
Weight
Æ
Height Press S1/S5 to change values. Press S3 to set
next parameter. Press S7 to exit.
Setting HRM in SET mode:
•
Press S1/S5 to select HRM and press S3 to confirm and it will appear “HRM ZN / ZONE 1”.
Press S1/S5 to select which zone you prefer. There are 3 zones available, HR zones 1 to 3.
•
Press S3 to set the HR zone. User has an option to manually change it by pressing S1/S5.
