Blades
FIG. NN
FIG. OO
FIG. PP
FIG. QQ
Fax: 763-535-8255
info@nationalequipment.com
23
FIG. RR
EXTRA HEAVY DUTY BLADES (FIGURE NN)
Extremely hard, high abrasion alloy for tough tear up situations. VCT, VAT, wood, tile, lighter
ceramic, rescraping thin-set, all carpets, cork, elastomeric coatings, rescraping rubber and
urethane coatings. Holds the edge extremely well.
6290
3’’ X 6’’ EXTRA HEAVY DUTY BLADE
.187
6291
3’’ X 8’’ EXTRA HEAVY DUTY BLADE
.187
6292
3’’ X 12’’ EXTRA HEAVY DUTY BLADE
.187
6293
3’’ X 14’’ EXTRA HEAVY DUTY BLADE
.187
6294
3’’ X 27’’ EXTRA HEAVY DUTY BLADE
.187
PART# DESCRIPTION
THICKNESS (IN.)
STRAIGHT SHANK BLADES (FIGURE OO)
Works well for ceramic, wood and thick epoxy. The ultimate for the toughest removals.
Made from an ultra-tough alloy, which is put through special processing to give these blades
unbelievable edge holding ability for ceramic epoxy, thin- set, mud set, decorative concrete
toppings and much more.
7070-2
4’’ X 2’’ STRAIGHT SHANK BLADES
.500
7070-3
4’’ X 3’’ STRAIGHT SHANK BLADES
.500
7070-4
4’’ X 4’’ STRAIGHT SHANK BLADES
.500
7070-6
4’’ X 6’’ STRAIGHT SHANK BLADES
.500
PART# DESCRIPTION
THICKNESS (IN.)
ANGLE SHANK BLADES (FIGURE PP)
Works well for ceramic and thick epoxy. The same application as the #7070 blades, but is
mounted at an angle to achieve the optimum shear point for optimum performance.
7071-2
4’’ X 2’’ ANGLE SHANK BLADES
.500
7071-3
4’’ X 3’’ ANGLE SHANK BLADES
.500
7071-4
4’’ X 4’’ ANGLE SHANK BLADES
.500
7071-6
4’’ X 6’’ ANGLE SHANK BLADES
.500
PART# DESCRIPTION
THICKNESS (IN.)
STRAIGHT SHANK BLADES WITH CARBIDE TIP (FIGURE QQ)
Works well for ceramic and thick epoxy. The same application as the #7070 blades, but are
carbide tipped for holding a sharp edge for long periods. Nothing else performs like carbide
when no other blade will work. Works well on elastomeric coatings.
7072-2
4’’ X 2’’ STRAIGHT SHANK W/CARBIDE TIP
.500
7072-3
4’’ X 3’’ STRAIGHT SHANK W/CARBIDE TIP
.500
7072-4
4’’ X 4’’ STRAIGHT SHANK W/CARBIDE TIP
.500
7072-6
4’’ X 6’’ STRAIGHT SHANK W/CARBIDE TIP .500
PART# DESCRIPTION
THICKNESS (IN.)
ULTRA HEAVY DUTY CERAMIC EPOXY ANGLE SHANK BLADES
WITH CARBIDE TIPS (FIGURE RR)
Designed for ceramic removal and thin-set rescraping. ½” of carbide. The extra carbide al-
lows for maximum resharp- ening. Strong enough to work on machines up to 3500 lbs.
7079-2
2’’ X 6’’ ULTRA HD CERAMIC EPOXY BLADE
.500
7079-4
4’’ X 6’’ ULTRA HD CERAMIC EPOXY BLADE
.500
7079-6
6’’ X 6’’ ULTRA HD CERAMIC EPOXY BLADE
.500
PART# DESCRIPTION
THICKNESS (IN.)
