Material Safety Data Sheet (MSDS) Information
Fax: 763-535-8255
info@nationalequipment.com
53
CHEVRON HD 22 - 68 - HYDRAULIC FLUID
PRODUCT IDENTIFICATION AND COMPANY IDENTIFICATION
Product Number(S): CPS221655, CPS221658, CPS221659
Synonyms: Texaco Rando HD22, Texaco Rando HD 32, Texaco
Rando HD 46, Texaco Rando HD 68
Company Information
Chevron Products Company
a division of Chevron U.S.A. Inc.
6001 Bollinger Canyon Road
San Ramon, CA 94583
United States of America
www.chevronlubricants.com
Transportation Emergency Response
CHEMTREC: (800) 424-9300 or (703) 527-3887
Health Emergency
Chevron Emergency Information Center: Located in the USA.
International collect calls accepted.
(800) 231-0623 or (510) 231-0623
Product Information
email: lubemsds@chevron.com
Product Information: 800-LUBE-TEK
MSDS Requests: 800-414-6737
HAZARDOUS INGREDIENTS / IDENTIFY INFORMATION
IMMEDIATE HEALTH EFFECTS
Eye:
Not expected to cause prolonged or signi
fi
cant eye irritation.
Skin:
Contact with the skin is not expected to cause prolonged or signi
fi
cant irritation. Not expected to be harmful to internal organs if absorbed
through the skin. High-Pressure Equipment Information: Accidental high-velocity injection under the skin of materials of this type may result in
serious injury. Seek medical attention at once should an accident like this occur. The inital wound at the injection site may not appear to be
serious at
fi
rst; but, if left untreated, could result in dis
fi
gurement or amputation of the affected part.
Ingestion:
Not expected to be harmful if swallowed.
Inhalation:
Not expected to be harmful if inhaled. Contains a petroleum-based mineral oil. May cause respiratory irritation or other pulmonary
effects following prolonged or repeated inhalation of oil mist at airborne levels above the recommended mineral oil mist exposure limit. Symp-
toms of respiratory irritation may include coughing and dif
fi
culty breathing.
FIRST AID MEASURES
Eye:
No speci
fi
c
fi
rst aid measures are required. As a precaution, remove contact lenses, if worn, and
fl
ush eyes with water.
Skin:
No speci
fi
c
fi
rst aid measures are required. As a precaution, remove clothing and shoes if contaminated. To remove the material from
skin, use soap and water. Discard contaminated clothing and shoes or thoroughly clean before reuse.
Ingestion:
No speci
fi
c
fi
rst aid measures are required. Do not induce vomiting. As a precaution, get medical advice.
Inhalation:
No speci
fi
c
fi
rst aid measures are required. If exposed to excessive levels of material in the air, move the exposed person to fresh
air. Get medical attention if coughing or respiratory discomfort occurs.
Note to Physicians:
In an accident involving high-pressure equipment, this product may be injected under the skin. Such an accident may
result in a small, sometimes bloodless, puncture wound. However, because of its driving force, material injected into a
fi
ngertip can be depos-
ited into the palm of the hand. within 24 hours, there is usually a great deal of swelling, discoloration, and intense throbbing pain. Immediate
treatment at a surgical emergency center is recommended.
FIRE FIGHTING MEASURES
Leaks/ruptures in high pressure system using materials of this type can create a
fi
re hazard when in the vicinity of ignition sources (eg. open
fl
ame, pilot lights, sparks, or electric arcs).
FIRE CLASSIFICATION:
OSHA Classi
fi
cation (29 CFR 1910.1200): Not classi
fi
ed by OSHA as
fl
ammable or combustible.
NFPA RATINGS:
Health: 0 Flammability: 1 Reactivity: 0
FLAMMABLE PROPERTIES:
Flashpoint: (Clevland Open Cuo) 150 C (302 F) (Min)
Autoignition: No Data Available
Flammability (Explosive) Limits (% by volume in the air): Lower: Not Applicable Upper: Not Applicable
MATERIALS/COMPONENTS
CAS NUMER
AMOUNT
Highly Refi ned Mineral Oil (C15 - C50)
mixture
90-100% weight
