background image

Safety 

 

- 5 - 

2.1 

Safety details 

 

The person in charge of safety shall be responsible for informing workers about the risks associated with 

dust collector operation. 
The obligation also exists of training workers so they are able to protect themselves and others. 
Failure to observe basic safety regulations and warnings could cause accidents during dust collector 

operation, maintenance and repair. Accidents can often be avoided by recognizing potentially dangerous 

situations before these occur. Operators should be aware of potential hazards and be trained and skilled 

enough. They should also have the tools necessary to perform these duties properly. 

NFE

  shall under no circumstances be deemed liable for accidents or damage caused by use of the dust 

collector by personnel not properly trained or who use it in an improper manner, as well as by even partial 

failure to comply with the safety regulations and intervention procedures indicated in this manual. 
The safety warnings and warning notices are indicated in this manual and on the product. 
Unless these hazard messages are heeded, the operator could become involved in accidents with serious 

consequences for him/herself and for other people. 
The safety messages are highlighted by the following symbols:  

 

Attention! 

Unless these messages are heeded, operator injuries could occur.  

 

 

Warning! 

Unless these messages are heeded, dust collector damage could occur. 

 

 

NFE

 cannot foresee all possible circumstances capable of representing a potential hazard. The warnings in 

this manual and on the products should not therefore be deemed exhaustive. In the event of tools, 

procedures, work or machining methods being used that are not explicitly recommended by 

NFE

, make sure 

no hazards exist for operators and others.  

Only ever use original NFE spare parts. 

 

NFE

 declines all liability in the event of non-original spare parts being used. 

 

 

Summary of Contents for DL2000






















Reviews: