34 / 64
15
Outdoor temperature value
16
Symbol for temperature
alarm (highest or lowest
value)
17
Selected channel for remote
sensor
18
Outdoor temperature informa-
tion
19
Symbol when snooze func-
tion is activated
20
Battery level indicator (Re-
mote sensor)
21
Symbol for radio signal
22
Outdoor temperature value
23
Selected transmission chan-
nel
8 Before commissioning
NOTICE
Avoid connection faults!
In order to avoid connection problems between the devices,
the following points must be observed during commission-
ing.
1.
Place the base unit (receiver) and sensor (transmitter)
as close together as possible.
2.
Connect the power supply to the base unit and wait un-
til the indoor temperature is displayed.
3.
Establish power supply for the sensor.
4.
Set up/operate the base unit and sensor within the ef-
fective transmission range.
5.
Make sure that the base unit and the radio sensor are
set to the same channel.
When changing the batteries, always remove the batteries
in both the base unit and the sensor and reinsert them in
the correct order so that the radio connection can be re-es-
Summary of Contents for 9070300
Page 3: ...Deutsch 4 English 24 Espa ol 43...
Page 63: ......