C) USING THE CHRONOGRAPH
The chronograph is able to measure and display time in 1/20th of a second
up to a maximum of 12 hours. The retrograde chronograph second hand*
runs continuously for 60 seconds after starting, and then stops at the "0"
position.
- Press button "B" to change the watch to chronograph mode. The second
hand stops at the "0" second position, and the chronograph 1/20 second
hand is engaged.
- The chronograph can be started and stopped each time button "A" is
pressed.
- The chronograph 1/20 second hand stops at the "0" second position 60
seconds after starting. When button "A" is pressed to stop the
chronograph, the chronograph 1/20 second hand advances rapidly to
display the measured time.
- Pressing button "B" resets the chronograph, and all hands return to their
"0" positions.
* Although the retrograde chronograph shows movement while measuring
time, the actual measurements will be shown when the "stop" button is
pushed.
2
