4. Changing the Battery
Opening the case back makes the hands go automatically to
the 12 position in order to avoid loss of synchronization.
When the battery voltage has reached the minimum value to
power the movement, a battery icon appears on the display
indicating that the battery needs to be changed.
The hands will go to the 12 position and the mode TIME 1 will
become permanent.
The word TIME 1 is replaced by a flashing BATT indicator. In
this mode it is no longer possible to use other functions.
Only the alarm programmed 24 hours or less before the
movement entered into this mode will be activated.
Replace with battery number CR2016.
The two hands turn 360 degrees. Both hands need to be on
the 12 position. Replace the case back.
If the two hands are not at the 12 position, go to
SYNCHRONIZATION mode to set them.
22
Summary of Contents for NG751 Series
