© National Instruments Corporation
C-1
VXIpc-486 Model 500 Series
Appendix C
Front Panel Indicators
This appendix describes the functions of the seven front panel LED indicators on the VXIpc-486
Model 500 Series computer. The significance of each LED is determined by its color: red,
green, or yellow. Red indicates a system failure, while green indicates an active state, and
yellow indicates that a board resource is being accessed.
The red
SYSFAIL
LED is lit whenever the VMEbus signal SYSFAIL is asserted. The
SYSFAIL
LED does not indicate which VXIbus module is asserting the signal. It indicates
only that one of the modules is driving SYSFAIL on the VXIbus backplane.
When the
FAILED
LED is lit, the VXIpc-486 is driving the SYSFAIL signal. The
FAILED
LED and the green
TEST
and
ON LINE
LEDs indicate the status of the VXIpc-486. The status
LED indications are shown in Table C-1. A successful system startup will sequence through the
first six states. The point of failure is indicated for states where the
FAILED
LED is lit for an
extended period of time.
Table C-1. Front Panel LED Indications
Sequence
FAILED
TEST
ON LINE
State
Point of Failure
1
OFF
OFF
OFF
No power
2
ON
OFF
OFF
Booting DOS
Failed to boot DOS
or waiting to run
self-test/
VXIINIT
3
ON
ON
OFF
In self-test/
VXIINIT
Failed self-test/
VXIINIT
4
OFF
ON
OFF
Self-test passed,
VXIINIT
complete
5
OFF
ON
ON
Performing Startup
RM operations
6
OFF
OFF
ON
Online, Startup RM
operations complete
ON
ON
ON
Failed
Failed Startup RM
ON
OFF
ON
Failed
Failed while online
Summary of Contents for 500 Series
Page 1: ...VXIpc 486 Model 500...
