© National Instruments Corporation
J-1
VXIpc-486 Model 500 Series
Appendix J
Troubleshooting
This appendix addresses system-related problems you may encounter when using the NI-VXI
bus interface software on the VXIpc-486 platform. This material covers the following issues:
•
Running the
VXIINIT
initialization program results in an error message or causes the
system to hang.
•
Running the
RESMAN
Resource Manager program results in incorrect data or causes the
system to hang.
•
The VXIpc-486 and/or its installed components (such as GPIB, COM Port) fail to work once
ISA bus plug-in cards are installed.
•
The network card installed does not operate properly.
•
The hard disk drive reports failures or other errors.
If you encounter any of these problems, your system may have a conflict with one of the
VXIpc-486 configuration settings. For proper operation, the VXIpc-486 requires the allocation
of the following system resources:
•
One interrupt level that cannot be shared with another device
•
Two blocks of memory space in the upper memory region of the PC AT address space
In addition, the VXIpc-486 components require port I/O register space, interrupts, and DMA
channels. These resources are statically allocated. For more details, refer to Appendix G,
VXIpc-486 Hardware Configuration
.
If you are unable to resolve your problem, and you have checked Appendix I,
Common
Questions
, for a solution to your problem, please fill out the appropriate forms in Appendix K,
Customer Communication
, and contact National Instruments.
What information should I have before I call National Instruments?
Make sure that none of the following questions relate to the problem you are having, and that the
suggestions contained in the answers do not correct the problem. Appendix I,
Common
Questions
, may also contain the solution to your problem. When you call National Instruments,
make sure you have filled out the
VXIpc-486 Model 500 Series Hardware and Software
Configuration Form
in Appendix K. If you are using NI-VXI software with your VXI-pc486,
use the configuration form in your software manual to describe your software settings.
Summary of Contents for 500 Series
Page 1: ...VXIpc 486 Model 500...
