©
National Instruments Corporation
I-1
Index
Numbers
+5 V signal
description (table), 4-3
self-resetting fuse, C-1
6034E and 6035E devices. See also hardware
overview.
block diagram, 3-1
features, 1-1
optional equipment, 1-6
requirements for getting started, 1-2 to 1-3
software programming choices, 1-3 to 1-5
National Instruments application
software, 1-3 to 1-4
NI-DAQ driver software, 1-4 to 1-5
register-level programming, 1-5
unpacking, 1-3
using PXI with CompactPCI, 1-2
A
ACH <0..15> signals
analog input signal connections, 4-6, 4-9
description (table), 4-3
acquisition timing connections. See DAQ timing
connections.
AIGATE signal, 4-29
AIGND signal
analog input signal connections, 4-7, 4-9
description (table), 4-3
I/O signal summary (table), 4-6
AISENSE signal
analog input signal connections, 4-7, 4-9
description (table), 4-3
I/O signal summary (table), 4-6
analog input. See also analog input modes.
common questions, C-2 to C-3
input range
measurement precision (table), 3-3
overview, 3-2 to 3-3
multichannel scanning considerations,
3-3 to 3-4
signal connections, 4-9 to 4-17
signal overview, 4-7 to 4-8
specifications, A-1 to A-4
accuracy information, A-2
amplifier characteristics, A-3
dynamic characteristics, A-4
input characteristics, A-1 to A-2
stability, A-4
transfer characteristics, A-3
types of signal sources, 4-7 to 4-8
floating signal sources, 4-7
ground-referenced signal sources, 4-8
analog input modes
available input configurations (table), 3-2
common-mode signal rejection
considerations, 4-17
differential connections, 4-11 to 4-14
ground-referenced signal sources, 4-12
nonreferenced or floating signal
sources, 4-13 to 4-14
exceeding common-mode input ranges
(caution), 4-9
overview, 3-2, 4-8 to 4-9
PGIA, 4-8 to 4-9
recommended input connections
(figure), 4-10
single-ended connection, 4-15 to 4-17
floating signal sources (RSE
configuration), 4-16
grounded signal sources (NRSE
configuration), 4-16 to 4-17
analog output
common questions, C-2 to C-3
glitch operation, 3-4
