Appendix A
Specifications
A-6
www.natinst.com
Monotonicity ..........................................12 bits, guaranteed after
calibration
Offset error
After calibration...............................±1.0 mV max
Before calibration ............................±200 mV max
Gain error (relative to internal reference)
After calibration...............................±0.01% of output max
Before calibration ............................±0.75% of output max
Voltage Output
Range ......................................................± 10 V
Output coupling ......................................DC
Output impedance...................................0.1
Ω
max
Current drive...........................................±5 mA max
Protection................................................Short-circuit to ground
Power-on state (steady state) ..................±200 mV
Initial power-up glitch
Magnitude........................................±1.1 V
Duration........................................... 2.0 ms
Power reset glitch
Magnitude........................................±2.2 V
Duration........................................... 4.2 µs
Dynamic Characteristics
Settling time for full-scale step...............10 µs to ±0.5 LSB accuracy
Slew rate .................................................10 V/µs
Noise .......................................................200 µVrms, DC to 1 MHz
Midscal transition glitch
Magnitude........................................±12 mV
Duration........................................... 2.0 µs