©
National Instruments Corporation
5
NI 9921/9922 Outdoor IP Enclosure Installation Guide
Step 4: Connect Internal Cables
The NI 9921/9922 ships with internal cables to connect the NI WLS-9000 Series device to the IP rated
connectors that are on the inside of the NI 9921/9922. Refer to Figure 7 while completing the following
steps to connect the internal cables to the NI 9921/9922 to the NI WLS-9000 Series device:
Figure 7.
Connecting Internal Cables
1.
Connect the internal RJ45 Ethernet cable to the NI 9922 and the NI WLS-9000 Series device.
2.
Connect the internal antenna cable from the NI 9921/9922 to the NI WLS-9000 Series device.
3.
Connect the internal trigger cable from the NI 9922 to the NI WLS-9000 Series device.
4.
Connect the internal power cable from the NI 9921/9922 to the NI WLS-9000 Series device.
1
Antenna
2
Internal Trigger Cable (NI 9922 Only)
3
Internal Power Cable
4
Internal RJ45 Ethernet Cable (NI 9922 Only)
5
Internal Antenna Cable
6
IP Sleeve
5
2
3
4
6
1
