Environmental
Refer to the manual for the chassis you are using for more information about meeting these
specifications.
Operating temperature (IEC 60068-2-1,
IEC 60068-2-2)
-20 °C to 55 °C
Storage temperature
(IEC 60068-2-1, IEC 60068-2-2)
-40 °C to 85 °C
Ingress protection
IP40
Operating humidity (IEC 60068-2-78)
10% RH to 90% RH, noncondensing
Storage humidity (IEC 60068-2-78)
5% RH to 95% RH, noncondensing
Pollution Degree
2
Maximum altitude
2,000 m
Indoor use only.
Environmental Management
NI is committed to designing and manufacturing products in an environmentally responsible
manner. NI recognizes that eliminating certain hazardous substances from our products is
beneficial to the environment and to NI customers.
For additional environmental information, refer to the
Minimize Our Environmental Impact
web page at
. This page contains the environmental regulations and
directives with which NI complies, as well as other environmental information not included in
this document.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers
At the end of the product life cycle, all NI products must be
disposed of according to local laws and regulations. For more information about
how to recycle NI products in your region, visit
.
Battery Replacement and Disposal
Cd/Hg/Pb
Battery Directive
This device contains a long-life coin cell battery. If you need to
replace it, use the Return Material Authorization (RMA) process or contact an
authorized National Instruments service representative. For more information about
compliance with the EU Battery Directive 2006/66/EC about Batteries and
Accumulators and Waste Batteries and Accumulators, visit
NI cRIO-9072/9073/9074 User Manual and Specifications
|
© National Instruments
|
23