cRIO-FRC Operating Instructions and Specifications
6
ni.com
Mounting the Chassis on a DIN Rail
You can order the NI 9915 DIN rail mount kit if you want to mount the
chassis on a DIN rail. You need one clip for mounting the chassis on a
standard 35 mm DIN rail. Complete the following steps to mount the
chassis on a DIN rail.
1.
Fasten the DIN rail clip to the chassis
using a number 2 Phillips
screwdriver and two M4
×
16 screws. National Instruments provides
these screws with the DIN rail mount kit.
Figure 7.
Installing the DIN Rail Clip on the cRIO-FRC
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com