1
2
3
1.
Prepare the surface for mounting the cRIO-9081 using the
2.
Align the cRIO-9081 on the surface.
3.
Fasten the cRIO-9081 to the surface using the M4 screws appropriate for the surface.
Screws must not exceed 8 mm of insertion into the cRIO-9081. Tighten the screws to a
maximum torque of 1.3 N · m (11.5 lb · in.).
Surface Mounting Dimensions
The following figure shows the surface mounting dimensions for the cRIO-9081.
Figure 9.
cRIO-9081 Surface Mounting Dimensions
329.7 mm
(12.98 in.)
303.3 mm
(11.94 in.)
158.3 mm
(6.23 in.)
26.4 mm
(1.04 in.)
17.6 mm
(0.69 in.)
40.6 mm
(1.60 in.)
20.3 mm
(0.80 in.)
23.7 mm
(0.93 in.)
1
NI cRIO-9081 User Manual
|
© National Instruments
|
21