Figure 13.
Connecting the End Brackets to the Chassis
1
2
NI cRIO-9081
1. Mounting Holes
2. Captive Screw
3.
Use a #2 Phillips screwdriver to tighten the captive screw on the end bracket.
4.
Repeat steps 2 and 3 to attach the other end bracket to the other end of the chassis.
Desktop Mounting Dimensions
The following figures show the desktop mounting dimensions for the cRIO-9081.
Figure 14.
cRIO-9081 Desktop Mounting Front Dimensions
39.6 mm
(1.56 in.)
28.2 mm
(1.11 in.)
28.1 mm
(1.11 in.)
NI cRIO-9081
NI cRIO-9081 User Manual
|
© National Instruments
|
27