•
Front Panel Switches Set to Reserved State—This warning is displayed when the CMOS
battery is dead and the DIP switches are configured to reset the CMOS and BIOS
settings. This warning indicates that the BIOS settings have the default values.
•
Warning: Recovering from CPU Overtemp—This warning indicates that the thermal
protection features of the cRIO-9081 shut down the system because of a high CPU
temperature.
•
Warning: Recovering from Ambient Overtemp—This warning indicates that the thermal
protection features of the cRIO-9081 shut down the system because of a high ambient
temperature.
BIOS Setup Utility
Use the BIOS setup utility to change configuration settings and to enable special functions.
The cRIO-9081 ships with configuration settings that work for most applications, but you can
use the BIOS setup utility to change configuration settings to meet the needs of your
application.
Changing BIOS settings can cause incorrect behavior, including failure to boot. In general, do
not change a setting unless you are sure what the setting does. Reset the BIOS settings to
restoring the default configuration settings.
Launching the BIOS Setup Utility
Complete the following steps to launch the BIOS setup utility.
1.
Connect a VGA monitor to the VGA video connector of the cRIO-9081.
2.
Connect a USB keyboard to one of the USB ports on the cRIO-9081.
3.
Power on or reboot the cRIO-9081.
4.
Hold down either the <F10> key or the <Del> key until
Please select boot
device:
appears onscreen.
5.
Use the Down Arrow key to select
Enter Setup
and press <Enter>. The setup utility
loads after a short delay.
The Main setup menu is displayed when you first enter the BIOS setup utility.
BIOS Setup Utility Keyboard Navigation
Use the following keys to navigate through the BIOS setup utility:
Table 16.
Navigation Keys
Key(s)
Function(s)
Left Arrow, Right
Arrow
Move between the different setup menus. If you are in a submenu,
these keys have no effect, and you must press <Esc> to leave the
submenu first.
Up Arrow, Down
Arrow
Move between the options within a setup menu.
30
|
ni.com
|
NI cRIO-9081 User Manual