Figure 18.
RESET Button Locations
SYSTEM
12-2
4
V
C
V
ISO
5-24 V
1
C
ISO
V
ISO
1. RESET Button
BIOS Configuration and System Recovery
You can change the configuration settings for the NI CVS-1459 in the BIOS setup. The BIOS
is the low-level interface between the hardware and PC software that configures and tests your
hardware when you boot the system. The BIOS setup program includes menus for configuring
settings and enabling features.
Most users do not need to use the BIOS setup program. The system ships with default settings
that work well for most configurations.
Entering BIOS Setup
Complete the following steps to start the BIOS setup program.
1.
Connect a monitor to the VGA connector on the NI CVS-1459.
2.
Connect a USB keyboard to one of the USB ports on the NI CVS-1459.
3.
While holding down the <Delete> key, power on or reboot the NI CVS-1459.
The NI CVS-1459 will enter the BIOS setup program and display the
Main
menu.
BIOS Keyboard Navigation
Use the following keys to navigate through the BIOS setup:
•
Left, right, up, and down arrows—Use these keys to move between different setup
menus. Press <Esc> to exit a submenu. Be sure number lock is off to use the numeric
keypad arrows.
•
<Enter>—Use this key to either open a submenu or display all available settings for the
highlighted configuration option.
NI CVS-1459 User Manual
|
© National Instruments
|
17
