SATA Configuration Submenu
Use this submenu to apply custom configurations to the processor of the NI CVS-1459.
Normally, you do not need to modify these settings, as the factory default settings provide the
most compatible and optimal configuration possible.
•
SATA Controller(s)—Enables or disables the SATA controller. The default is
Enabled
.
USB Configuration Submenu
Use the submenu to apply alternate configurations to the USB ports. Normally, you do not
need to modify these settings, as the factory default settings provide the most compatible and
optimal configuration possible.
•
Legacy USB Support—Specifies whether or not legacy USB support is enabled. Legacy
USB support refers to the ability to use a USB keyboard and mouse during system boot or
in a legacy operating system such as DOS. The default is
Enabled
.
•
Overcurrent Reporting—Enables or disables operating system notifications of USB
overcurrent events. The default is
Disabled
.
•
Transfer Timeout—Specifies the number of seconds the POST waits for a USB mass
storage device to start. The default is
20
seconds.
•
Device Reset Timeout—Specifies the maximum amount of time a device can take to
properly report itself during the POST. The default value is
Auto
. Alternatively, the
Manual
override setting can be used to support slow USB devices.
•
Mass Storage Devices—When USB storage is connected to the device, this menu lists
each USB drive. You can set the emulation type of the USB storage. The options include
Auto, Floppy, Forced FDD, Hard Disk, and CD-ROM. The default is
Auto
.
Boot Menu
This screen displays the boot order of devices associated with the NI CVS-1459. The BIOS
proceeds down the
Boot priority order list
in search of a bootable device. Devices under the
Excluded from boot order
list will not be used for booting. If the BIOS fails to find any
bootable device, an error message is displayed.
The Boot setup menu includes the following submenus:
•
Boot Settings Configuration—Use this setting to access the
Boot Settings Configuration
submenu.
•
PXE Network Boot—This setting specifies whether or not the PXE network boot agent is
enabled. When this setting is enabled, the Intel Boot Agent is displayed in the
Boot
Option Priorities
menu, allowing you to boot from a PXE server on the local subnet.
Note that the Intel Boot Agent device names are preceded by
IBA GE Slot
in the
Boot
Option Priorities
menu. The system must be restarted for this setting to take effect. The
default value is
Disabled
.
•
Boot Option Priorities—These setting specify the order in which the BIOS checks for
bootable devices, including the local hard disk drive, removable devices such as USB
flash disk drives or USB CD-ROM drives, or the PXE network boot agent. The BIOS
will first attempt to boot from the device associated with
Boot Option #1
, followed by
Boot Option #2
and
Boot Option #3
. If multiple boot devices are not present, the BIOS
setup utility will not display all of these configuration options. To select a boot device,
NI CVS-1459 User Manual
|
© National Instruments
|
19
