2.
Connect a USB hub to the other USB port on the NI CVS-1459. Connect a keyboard and
mouse to the USB hub. If a USB hub is not available, the keyboard can be used to
navigate the recovery software.
3.
Power on the NI CVS-1459.
4.
Press the <F10> key on the keyboard.
5.
Select the bootable USB flash drive or the DVD drive.
6.
Press any key to boot from the recovery media.
7.
Follow the on-screen instructions to format the hard drive and install the operating
system.
After restoring the operating system, reinstall any software and drivers onto the NI CVS-1459.
Mounting the NI CVS-1459
This section provides information for creating a custom mount for the NI CVS-1459. If you do
not want to create a custom mount, a panel and DIN rail mount kit for the NI CVS-1459 is
available from National Instruments (part number 781740-01).
Caution
If you choose not to mount the NI CVS-1459 on a DIN rail or flat surface,
do not position the NI CVS-1459 with the heat sinks resting on any surface. Doing
so may cause the NI CVS-1459 device to overheat. Refer to the
NI CVS-1459
Specifications
for temperature specifications.
The following figures provide dimensional drawings and clearance information for the NI
CVS-1459.
NI CVS-1459 User Manual
|
© National Instruments
|
23
