Index
©
National Instruments Corporation
I-33
DAQ-STC Technical Reference Manual
RTSI_Board_i_Pin_Dir bit, 6-4
RTSI_BRD<0..3> signals (table), 6-2
RTSI_Clock_Mode bit, 6-4
RTSI_OSC signal (table), 6-2
RTSI_Sub_Selection_1 bit, 6-5
RTSI_Trig_i_Output_Select bit, 6-5
RTSI_Trig_i_Pin_Dir bit, 6-5
RTSI_TRIGGER<0..6> signals (table), 6-2
RTSI signals
CTRGATE reference pin selection
(table), 4-54
CTRSRC reference pin selection, 4-53
external trigger timing, 3-102
external UPDATE mode, 3-12
master/slave trigger, 3-15
SCAN_IN_PROG deassertion, 2-103
simplified analog input model, 2-5
simplified analog output model, 3-4
START trigger and SCAN_IN_PROG
assertion, 2-100
external CONVERT mode, 2-102
internal CONVERT mode, 2-101
START1 and START2 triggers, 2-97
asynchronous mode, 2-99 to 2-100
synchronous mode, 2-98 to 2-99
START1 trigger output, 3-104 to 3-107
STOP trigger, 2-103
asynchronous mode, 2-104
synchronous mode, 2-104
RTSI trigger module, 6-1 to 6-7
features, 6-1
overview, 6-1
pin interface, 6-1 to 6-2
programming information, 6-2 to 6-5
bitfield descriptions, 6-3 to 6-5
MSC_RTSI_Pin_Configure
function, 6-3
RTSI_BRD<0..1> output selections
(table), 6-7
RTSI_BRD<2..3> output selections
(table), 6-7
RTSI_TRIGGER<0..6> output
selections (table), 6-6
S
SC counter
control circuitry, 2-123 to 2-125
description, 2-123
SC_CE signal
description (table), 2-115
SC counter operation, 2-125
SC_CLK signal (table), 2-115
SC_DISARM signal, 2-125
SC_GATE signal (table), 2-115
SC_HOLD signal (table), 2-115
SC_LOAD signal
description (table), 2-116
SC counter operation, 2-125
SC_LOAD_SRC signal (table), 2-116
SC_SRC signal (table), 2-116
SC_START1 signal (table), 2-116
SC_TC signal
continuous acquisition mode, 2-15
counter outputs (figure), 2-105
description (table), 2-116
nominal pulsewidths (table), 2-133
pin interface (table), 2-23
posttrigger acquisition mode, 2-14
staged acquisition, 2-16
scan functions
AI_Number_Of_Scans, 2-33 to 2-34
AI_Scan_End, 2-37 to 2-38
AI_Scan_Rate_Change, 2-43 to 2-44
AI_Scan_Start, 2-34 to 2-37, 2-42 to 2-43
SCAN_IN_PROG signal
assertion, analog input trigger output,
2-100 to 2-102
external CONVERT mode, 2-102
internal CONVERT mode, 2-101
deassertion, analog input trigger
output, 2-103
