©
National Instruments Corp.
17
cFP-CB-1/2/3/4
Caution
Improper wiring may defeat isolation barrier.
Environmental
Compact FieldPoint connector blocks are intended for indoor use
only. For outdoor use, the Compact FieldPoint system
must
be
mounted inside a sealed enclosure.
Operating temperature ...................... –40 to 70 °C
Storage temperature .......................... –55 to 85 °C
Humidity ........................................... 10 to 90% RH,
noncondensing
Maximum altitude............................. 2,000 m; at higher altitudes,
the isolation voltage ratings
must be lowered
Pollution Degree ............................... 2
Shock and Vibration
Operating vibration, random
(IEC 60068-2-64).............................. 10–500 Hz, 5 g
rms
Operating vibration, sinusoidal
(IEC 60068-2-6)................................ 10–500 Hz, 5 g
Operating shock
(IEC 60068-2-27).............................. 50 g, 3 ms half sine,
18 shocks at 6 orientations;
30 g, 11 ms half sine,
18 shocks at 6 orientations
Safety
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement,
control, and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CSA 61010-1
Note
For UL and other safety certifications, refer to the
product label or visit
ni.com/certification
, search
by model number or product line, and click the
appropriate link in the Certification column.
