©
National Instruments Corp.
15
FP-DI-330 and cFP-DI-330
CE Compliance
This product meets the essential requirements of applicable
European Directives, as amended for CE marking, as follows:
Low-Voltage Directive (safety)......... 73/23/EEC
Electromagnetic Compatibility
Directive (EMC) ............................... 89/336/EEC
Note
Refer to the Declaration of Conformity (DoC) for
this product for any additional regulatory compliance
information. To obtain the DoC for this product, visit
ni.com/hardref.nsf
, search by model number or
product line, and click the appropriate link in the
Certification column.
Mechanical Dimensions
Figure 12 shows the mechanical dimensions of the FP-DI-330
installed on a terminal base. If you are using the cFP-DI-330,
refer to your Compact FieldPoint controller user manual for the
dimensions and cabling clearance requirements of the Compact
FieldPoint system.
Figure 12.
FP-DI-330 Mechanical Dimensions
109.5 mm
(4.31 in.)
91.44 mm
(3.60 in.)
107.19 mm
(4.22 in.)
